Honda Ridgeline Owner's Manual page 264

Lights
6. Install the new bulb into the
socket.
7. Push the socket into the light
assembly, and turn it clockwise
until it locks.
8. Turn on the lights to make sure
the new bulb is working.
9. Install the rear light assembly in
the rear pillar. Tighten the two
bolts securely.
258
Replacing a High-mount Brake
Light Bulb
LENS SEGMENT
1. Place a cloth on the edge of the
lens segment. Remove each lens
segment by carefully prying on its
edge with a small flat-tipped
screwdriver.
2. Remove the screw under each lens.
3. Pull the high-mount brake light
assembly out of the vehicle.
4. Remove the three mounting
screws from the light assembly.
5. Remove the lens from the light
assembly.
6. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.