Honda Ridgeline Owner's Manual page 157

CD Player
RT, RTX, and Canadian LX models
With the ignition in the
ACCESSORY (I) or ON (II) position,
insert a CD about halfway into the
CD slot. The drive will pull the CD in
the rest of the way and begin to play
it. You operate the CD player with
the same controls used for the radio.
The number of the track playing is
shown in the display. The system will
continuously play a CD until you
change modes.
Do not use CDs with adhesive labels.
The label can curl up and cause the CD
to jam in the unit.
You can also play 3-inch (8-cm) discs
without using an adapter ring.
To Change Tracks
Push the side of the SEEK/
SKIP bar to play the next track on
the disc. Push the side once to
replay the track in play; press it twice
to replay the previous track.
To move rapidly within a track, press
and hold the or the
of the bar.
REPEAT Press the RPT button
to continuously replay a track. You
will see RPT in the display. Press the
RPT button again to turn it off.
RANDOM Press the RDM
button to play the tracks in random
order. You will see RDM in the
display. Press the RDM button again
to return to normal play.
Playing a CD, CD Changer
SCAN The SCAN function
samples all the tracks on the
selected disc in the order they are
recorded. To activate it, press and
release the SCAN button. You will
see SCAN in the display, and you will
get a 10 second sampling of each
side track on the selected CD. Press the
SCAN button again to get out of scan
mode.
151