Instrument Panel Brightness - Honda Ridgeline Owner's Manual

Headlights, Instrument Panel Brightness
Daytime Running Lights
Canadian models only
With the headlight control dial off,
the high beam headlights and the
high beam indicator come on with
reduced brightness when you turn
the ignition switch to the ON (II)
position and release the parking
brake. They remain on until you turn
the ignition switch off, even if you
set the parking brake.
The headlights revert to normal
operation when you turn them on
with the headlight control dial.
78

Instrument Panel Brightness

INSTRUMENT PANEL
BRIGHTNESS CONTROL DIAL
The dial on the instrument panel
controls the brightness of the
instrument panel lights and the
console compartment light. Turn the
dial to adjust the brightness.
The instrument panel will illuminate
with reduced brightness when you
unlock and open the driver's door.
The brightness will increase and go
to a normal level when you insert the
key in the ignition switch.
If you do not insert the key in the
ignition switch after opening the
driver's door, the illumination turns
off about 30 seconds after you close
the door.
If you insert the key but do not turn
the ignition switch to the ON (II)
position, the illumination turns off in
about 10 seconds.
The instrument panel brightness is
dimmed when you turn the headlight
control dial to the '' '' or
'' '' position to reduce glare at
night. To cancel it, turn the
instrument panel brightness control
dial upward fully until you hear a
click.