Starting Remotecapture - Canon EOS-1D - Digital Camera SLR Instructions Manual

Starting RemoteCapture

1
Click the [Start] button and select [Programs] ([All Programs] on
Windows XP) s [Canon Utilities] s [RemoteCapture] s
[RemoteCapture xx].
●
RemoteCapture version information is displayed in xx.
\
The [RemoteCapture] dialog box appears.
2
Click the [Connect] button.
\
The Save window and Shooting
window appear.
●
To quit RemoteCapture, click the [Disconnect] button and select [Exit] from the
[File] menu.
●
If you use RemoteCapture to take pictures while you are using the WIA Driver
Windows Explorer to display images on the camera, RemoteCapture may not
operate correctly.
●
When you are using mirror lockup to take pictures, there is a delay of approximately
2 seconds after you click the RemoteCapture [Release] button before the picture is
actually taken.
Selecting [Camera Settings] from the [Camera] menu in the Shooting window allows
you to specify the camera settings. For information on how to specify the camera
settings, see Chapter 6 "Specifying Camera Settings from Your Computer".
7-2