Working with Selected Images
Operations that Can Be Used with Images
The table below lists the operations available with the TWAIN Driver. When a JPEG image is
selected, the unavailable operations are shown grayed out. When operations such as [Rotate
image] are specified for a RAW image recorded in the RAW+JPEG formats, the operations are
also applied to the JPEG image recorded at the same time. However parameters that can only
be used with RAW images, such as [Color Matrix], are not applied.
Image recording formats and image processing options
Operations
Checkmark
Protect
Erase
AF Frame Display
Play Sound
Comment input*
Transfer Image
Save File
Rotate image
Color Matrix
Digital Exposure
Compensation
Adjust Tone Curve
White Balance
Click White Balance
IPTC Information
●
Operations marked with an asterisk (*) cannot be used with images saved on a CF card in
the camera and are shown grayed out in the control panel. Save such images to your
computer or use the operation via a card reader.
The sharpness for RAW images can be specified in the [Preferences] dialog box
(➞3-39).
3-14
RAW
JPEG
✓
✓
Used for selecting specific images.
✓
✓
Protects the image so it cannot be erased.
✓
✓
Erases unprotected images.
✓
✓
Displays the focused or the used AF point.
✓
✓
Plays the sound recorded by the camera.
✓
✓
Attaches a brief comment to each frame.
Transfers images to applications such as
✓
✓
Photoshop 5.0 LE.
✓
✓
Saves an image to your computer, etc.
✓
✓
Rotates the image by 90-degree unit.
Sets film-equivalent characteristics or color
✓
–
range characteristics.
✓
–
Adjusts the brightness.
✓
–
Adjusts the brightness and color saturation.
✓
–
Adjusts the white balance.
✓
–
Automatically adjusts the white balance.
✓
–
Sets the IPTC information details.
Description