Enables Automatic Af Point Selection When C.fn-11-2 Has Been Set; Sets The Continuous Shooting Speed; Limits The Number Of Shots During Continuous Shooting - Canon EOS-1D - Digital Camera SLR Instructions Manual

Enables automatic AF point selection when C.Fn-11-2 has
P.Fn-18
been set.
●
Enables the standard horizonal AF point selection together with automatic AF point
selection with C.Fn-11-2.
●
Convenient when you want to use automatic AF point selection while C.Fn-11-2 has been
set.
If P.Fn-17 [Disables automatic AF point selection] has also been set, P.Fn-17 will
override P.Fn-18 to disable automatic AF point selection.

Sets the continuous shooting speed.

P.Fn-19
●
You can select the number of continuous shots during low- or high-speed continuous
shooting.
●
By reducing the maximum continuous shooting speed, AI Servo AF continuous shooting
can be more stable.
Depending on the AF mode, it may not be possible to complete the selected number
of continuous shots. (➞ "Drive Mode Selection" in the EOS-1D Instructions.)

Limits the number of shots during continuous shooting.

P.Fn-20
●
This enables you to set the maximum number of shots to be exposed during continuous
shooting while the shutter button is pressed fully.
●
Convenient when you do not want to shoot an unwanted scene that follows.
Personal Function Settings
6-17