Installation - Bodum Bistro 11160 Instructions For Use Manual

Electric coffee grinder
Hide thumbs Also See for Bistro 11160:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
– The use of accessory attachements not recommended by
the appliance manufacturer may result in fire, electric
shock or injury to persons.
– This appliances has a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this
plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not modify
the plug in any way.
– In the case of a fault or malfunction occurring, switch the
appliance off; do not attempt to repair it yourself. Have
repairs to the appliance carried out only by a customer
service workshop that is authorised by the manufacturer.
Failure to comply with the above safety notes can com-
promise the safety of the appliance.
– Never attempt to exchange the mains cable of the appli-
ance as special tools are required for this. To ensure
continued safety of the appliance, if the cable needs to
be repaired or exchanged, have this carried out exclu-
sively by a customer service workshop authorised by the
manufacturer.
– Unplug from outlet when not in use, before putting on or
taking off parts and before cleaning.
– Avoid contacting moving parts.
– To protect against fire, electric shock and injury to persons
do not immerse cord, plug and coffee grinder in water or
other liquid.
– This appliance is not intended for use by young children
or infirm persons unless they have been adequately super-
vised by a responsible person to ensure that they can use
the appliance safely.

inStallation

– Place the appliance on a stable flat surface which is nei-
ther hot or near a heat source. The surface must be dry.
Keep the appliance and its mains cable out of reach of
children.
– Ensure that the voltage indicated on the rating plate
of the appliance agrees with the mains voltage in your
area.
– The manufacturer declines any liability for accidents
caused by faulty or non-existing earthing of the appli-
ance.
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents