Installing And Removing Isms - Cisco WS-C2950-24 Installation Manual

Installing and Removing ISMs

Figure 5-11
Replace the chassis cover. For Cisco 2900 series ISRs, see the
Step 8
Cover" section on page
Performance Engine" section on page
Installing and Removing ISMs
A Integrated Service Modules (ISMs) plug into the ISM slot on the motherboard. ISMs are sold as a
spare part, and they have a label that identifies the ISM type. See the following sections for ISM
installation tasks:
•
•
•
•
•
Always wear an ESD-preventive wrist strap and ensure that it makes good contact with your skin when
Caution
you remove or install an ISM. Connect the equipment end of the wrist strap to the metal part of the
chassis.
Handle ISMs by the edges only. ISMs are ESD-sensitive components and can be damaged by
Caution
mishandling.
Cisco 2900 Series and 3900 Series Hardware Installation Guide
5-16
Installing a DRAM DIMM
5-4. For Cisco 3900 series ISRs, see the
Software Requirement for ISMs section, page 5-17
Locating an ISM section, page 5-17
Removing an ISM section, page 5-17
Installing an ISM section, page 5-18
Verifying ISM Installation section, page 5-20
Chapter 5 Installing and Upgrading Internal Modules and FRUs
"Removing and Replacing the Chassis
"Removing and Replacing the Services
5-6.
OL-18712-03