Cisco WS-C2950-24 Installation Manual page 179

Chapter 5 Installing and Upgrading Internal Modules and FRUs
Figure 5-22
Push the PVDM onto the guide posts. The guide posts should protrude through the guide holes. The
Step 4
connector clips seat themselves on top of the PVDM2, holding the PVDM2 in the adapter.
Push both retainer clips over their respective catches. The retainer clips prevent the connector clips from
Step 5
releasing the PVDM2.
OL-18712-03
Installing the PVDM2 into the PVDM Adapter
o
45
Figure 5-23 shows the PVDM2 properly installed in the adapter.
Cisco 2900 Series and 3900 Series Hardware Installation Guide
Installing and Removing PVDM2s
5-27