Using Cisco Configuration Professional Express; Using Cisco Ios Cli-Manual Configuration; Performing The Initial Configuration On The Router - Cisco WS-C2950-24 Installation Manual

Performing the Initial Configuration on the Router

Using Cisco Configuration Professional Express

Use Cisco Configuration Professional Express web-based application to configure the initial router
settings. See the Cisco Configuration Professional Express User Guide document on Cisco.com for
detailed instructions,
http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional_express/version1_1/on
line_help/CCPE11.pdf
For help with interface and port numbering, see the
page
Using Cisco IOS CLI—Manual Configuration
This section shows you how to access the command-line interface (CLI) to perform the initial
configuration on the router.
If the system configuration dialog message does not appear, a default configuration file was installed on
the router prior to shipping. See the
page 4-8
For help with interface and port numbering, see the
page
Enter the following answer when the system message appears on the router.
Step 1
--- System Configuration Dialog ---
At any point you may enter a question mark '?' for help.
Use ctrl-c to abort configuration dialog at any prompt.
Default settings are in square brackets '[]'.
Would you like to enter the initial configuration dialog? [yes/no]: no
Press Return to terminate autoinstall and continue with manual configuration:
Step 2
Would you like to terminate autoinstall? [yes] Return
Several messages are displayed, ending with a line similar to the following:
...
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled <date> <time> by <person>
Press Return to bring up the Router> prompt.
Step 3
...
flashfs[4]: Initialization complete.
Router>
Type enable to enter privileged EXEC mode:
Step 4
Router> enable
Router#
•
•
•
•
Cisco 2900 and 3900 Series Hardware Installation
4-8
1-27.
to configure the router.
1-27.
Configuring the Router Hostname, page 4-9
Configuring the Enable and Enable Secret Passwords, page 4-10
Configuring the Console Idle Privileged EXEC Timeout, page 4-11
Configuring Gigabit Ethernet Interfaces, page 4-13
"Slot, Port, and Interface Information" section on
"Using Cisco Configuration Professional Express" section on
"Slot, Port, and Interface Information" section on
(Optional)
(Required)
Chapter 4 Configuring the Router
(Required)
(Optional)
OL-18712-01