Table of Contents
Advertisement
Step 3:
Carefully pull on the blade to remove it, as shown here:
CAUTION:
If the blade does not remove easily, you may need to remove the screw
that holds the blade stylus in place, as shown here:
If the blade still does not remove easily, insert the screwdriver or other
appropriate implement into the screw hole and push the blade out
Step 4:
Insert the new blade. If you removed the screw, tighten it or replace it.
B-8
Replacing the Stylus Blade
Figure B-6. Removing the blade.
Be careful to grasp the blade on the shank, and not on the
cutting edge.
Figure B-7. Stylus screw adjustment
Use screw
driver to
remove screw
to release
stylus blade (if
necessary)
Advertisement
Table of Contents
