Creating Vlans - Cisco SD208T-NA Administration Manual

VLAN Management

Creating VLANs

STEP 3
STEP 4
Creating VLANs
STEP 1
STEP 2
Cisco Small Business 200 Series Smart Switch Administration Guide
• Current Default VLAN ID—Displays the current default VLAN ID.
• Default VLAN ID After Reboot—Enter a new VLAN ID to replace the default
VLAN ID after reboot.
Click Apply.
Click Save (in the upper-right corner of the window) and save the Running
Configuration to the Startup Configuration.
The Default VLAN ID After Reset becomes the Current Default VLAN ID after
you reboot the switch.
You can create a VLAN, but this has no effect until the VLAN is attached to at least
one port, either manually or dynamically. Ports must always belong to one or more
VLANs.
The 200 Series switch supports up to 256 VLANs, including the default VLAN.
Each VLAN must be configured with a unique VID (VLAN ID) with a value from
1 to 4094. The switch reserves VID 4095 as the Discard VLAN. All packets
classified to the Discard VLAN are discarded at ingress, and are not forwarded to
a port.
To create a VLAN:
Click VLAN Management > Create VLAN. The Create VLAN page is displayed.
The Create VLAN page displays the following fields for all VLANs:
• VLAN ID—User-defined VLAN ID.
• VLAN Name—User-defined VLAN name.
• Type—VLAN type:
- Static—VLAN is user-defined.
- Default—VLAN is the default VLAN.
Click Add to add a new VLAN or select an existing VLAN and click Edit to modify
the VLAN parameters. The Add/Edit VLAN page is displayed.
12
160