Monitoring The Fan Status And Temperature; Defining Idle Session Timeout - Cisco SD208T-NA Administration Manual

General Administrative Information

Monitoring the Fan Status and Temperature

Monitoring the Fan Status and Temperature

Defining Idle Session Timeout

STEP 1
STEP 2
Cisco Small Business 200 Series Smart Switch Administration Guide
The Health page displays the switch fan status and temperature on all devices
with fans.
To view the switch health parameters, click Status and Statistics > Health. The
Health page opens.
Health
The page displays the following fields:
• Fan Status—Fan status. The following values are possible:
- OK—Fan is operating normally.
- Fail—Fan is not operating correctly.
- N/A—Fan ID is not applicable for the specific model.
• Temperature (in Celsius and Fahrenheit)—The internal temperature of the
switch (for devices with temperature sensors).
• Alarm Temperature (in Celsius and Fahrenheit)—The internal temperature
of the unit (for relevant devices) that triggers an alarm.
Idle Session Timeout
The
session can remain idle before it times out and you must log in again to reestablish
the session.
• HTTP Session Timeout
• HTTPS Session Timeout
To set the idle session timeout of an HTTP or HTTPS session:
Click Administration > Idle Session Timeout. The
opens.
Select the timeout for the each session from the corresponding list. The default
timeout value is 10 minutes.
configures the time interval during which the HTTP
Idle Session Timeout
5
page
49