Bissell OptiClean Multi Cyclonic 30C7 Series User Manual page 15

M
aintenance and care
turbobrush tool maintenance
the turbobrush tool should be
checked regularly for clogs or
debris wrapping around the brush.
note: Model 30c7t comes with
the pet turbobrush tool and
follows same maintenance
instructions.
1. Remove tool from hose or from vacuum.
2. Twist collar so opening is at the top and
lift top cover to remove.
3. Remove the brush from the belt and clean
debris.
4. Replace the brush inside the belt and
place ends into slots on sides.
5. Reposition top cover making sure to line
up inside tab at the front with the opening
on the cover. Twist collar until opening is
at the bottom to lock into place.
w w w . b i s s e l l . c o m
2.
4.
5.
Tip:
TurboBrush may not be turning
®
due to loss of suction. Refer to
pg. 11 for checking and clean-
ing clogs.
8 0 0 . 2 3 7 . 7 6 9 1
15