Advertisement
Table of Contents
Model: RPK86
M-Class & Black Max
Rack Mounting Kit
Installation
For greater rear support when rack mounting an M-Class or Black Max amplifier, the
RPK86 Rack Mounting Kit can be attached to the rear of the amplifier by following the
steps below.
1. Remove and save the three cover screws from the chassis of the amplifier.
2.
Position the rack attachment as shown.
3.
Replace and tighten the three cover screws to secure the rack attachments.
Specifications subject to change without notice.
© 2001 Bogen Communications, Inc.
Part No. 54-2064-01R1 Printed in USA. 0105
Rear of Amplifier
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel. 201-934-8500, Fax: 201-934-9832, www.bogen.com
Advertisement
Table of Contents
Need help?
Do you have a question about the RPK86 and is the answer not in the manual?
Questions and answers