Bogen NEAR OPS1 Installation And Use Manual
Bogen NEAR OPS1 Installation And Use Manual

Bogen NEAR OPS1 Installation And Use Manual

Hide thumbs Also See for NEAR OPS1:

Advertisement

Quick Links

Orbit Pendant Speaker
OPS1
Installation and Use Manual
© 2003 Bogen Communications, Inc.
All rights reserved.
Specifications subject to change without notice.
54-2090-01D
0907

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NEAR OPS1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Bogen NEAR OPS1

  • Page 1 Orbit Pendant Speaker OPS1 Installation and Use Manual © 2003 Bogen Communications, Inc. All rights reserved. Specifications subject to change without notice. 54-2090-01D 0907...
  • Page 2 YOU MUST USE A SAFETY CABLE AND SECURELY TIGHTEN ALL HARDWARE, CABLE CLAMPS, AND INSTALL EYEBOLTS AS DIRECTED IN THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN PROPERTY DAMAGE, INJURY OR DEATH, AND LEGAL LIABILITY TO YOU AND YOUR COMPANY.
  • Page 3: Package Contents

    OPS1 Front Drawing OPS1 Front Drawing (grille partially shown) OPS1 Rear Drawing OPS1 Rear Drawing Package Contents...
  • Page 4 Speaker Grille Installation & Removal Selecting Power Level 70V/100V Systems 16 Ω Systems Installation Removal...
  • Page 5 Daisy-Chaining Speaker Phasing...
  • Page 6 Speaker Assembly Cables A BACKUP SAFETY CABLE FOR THE PRIMARY DROP CABLE IS REQUIRED FOR THE PROPER INSTALLATION OF THIS SPEAKER. SEE THE INSIDE FRONT COVER FOR IMPORTANT WARNING INFORMATION. CK10 (Cable Kit, 10')
  • Page 7 Free Space Response, 16-ohm input Front panel, switch-selected.
  • Page 8 Bogen has been advised of the possibility of such damages or losses. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Table of Contents