Cuemix Fx Installation; Cuemix Fx Basic Operation - MOTU MicroBook User Manual

CUEMIX FX INSTALLATION

CueMix FX is installed with the rest of
your MicroBook software.

CUEMIX FX BASIC OPERATION

Here is a brief overview of the CueMix FX
mixer.
Five stereo mix busses
CueMix FX provides five stereo mix
busses: Mix 1, Mix 2, Mix 3, and so on.
Each mix bus can take any number of
inputs and mix them together into a
Mix bus
menu
Channel
Focus
Channel
scroll
bar
Mic inputs (split into
Figure 7-1: CueMix FX is a virtual mixer that gives you control
over the MicroBook's on-board mixing features .
40
Tabs for
inputs, mix
busses and
outputs
mono channels)
single stereo audio stream that you can
then assign to any MicroBook output
pair — or combination of output pairs —
that you choose. For example, Mix 1
could go to the headphones, Mix 2 could
go to the main outs, Mix 3 could go to a
piece of outboard gear connected to
analog outputs 3-4, and so on. You can
also assign a mix to multiple output pairs.
For example, you could assign Mix 1 to
the Main Out, Phones, and Line Out.
Mix bus
master
fader
Host Tabs for channel strip
computer settings, including EQ and
audio dynamics, as well as
global settings such as the
meter bridge and Signal
Generator.
Monitoring
section
Channel
settings
Monitor
group
metering
Output
volume
controls
Grow
handle
C U E M I X F X