Stop And Go; Safety Features - Black Widow Security BW FM 6150 User Manual

Disengaging the Auto Cold Start feature:
The Auto Cold Start feature can be
deactivated in one of three ways:
• Press the brake pedal.
• Turn on the ignition.
• Remote start the vehicle using the
transmitter.

STOP AND GO

The Stop and Go feature allows the vehicle
to remain running without use of the ignition
key during short stops.
To activate the Stop and Go feature:
1. With engine running push transmitter
button 4 (on FM 2-way press button 2.).
• The parking lights will turn on.
2. Remove the key from the ignition.
3. Exit the vehicle and lock the doors
manually or using transmitter button 1*.
To resume driver control:
1. Unlock the doors manually or by
pressing transmitter button 2*.
2. Turn on the ignition.
• The vehicle resumes driver control.

SAFETY FEATURES

The System will not start the vehicle if the
brake pedal is pressed or the hood is open.
Also, if the brake is pressed or the hood is
opened while remote running, the remote
start will shut down.
REPLACING LOST OR STOLEN
REMOTE TRANSMITTERS
This System can "learn" a maximum of 4
remote transmitters.To add a transmitter or
replace lost/stolen transmitters, please
consult with an authorized Black Widow
Dealer.
*
Optional Feature
5