Push To Talk Log; Exit Push To Talk; Device Security; Define Security Settings - Nokia E50 User Manual

C a l l s a n d v o i c e a p p l i c a t i o n s
To view the currently active participants in the channel, select
To invite a participant to a channel, select

Push to talk log

To open the push to talk log, select
talk calls.
Tip: To initiate a one-to-one call from

Exit push to talk

Select Options > Exit. Select
background.

Device security

Select Menu Tools Settings
> >
You can modify the security settings for the PIN code, automatic lock, and SIM card change, and change codes and passwords.
Avoid using codes that are similar to emergency numbers to prevent accidental dialing of the emergency number.
Codes are shown as asterisks. When you change a code, enter the current code, then the new code twice.

Define security settings

To define device and SIM card, certificate management, and security module settings, select a setting and
When calls are limited to closed user groups, calls may be possible to the official emergency number programmed into your
device.
Define the following settings:
PIN code request — Select
•
be changed if the device is switched off. Some SIM cards do not allow turning off the PIN code request.
PIN code — Change the PIN code. The PIN code must be 4 to 8 numbers long. The PIN code protects your SIM card against
•
unauthorized use and is provided with the SIM card. After three consecutive incorrect PIN code entries, the PIN code is blocked,
and you need to use the PUK code to unblock it before you can use the SIM card again.
PIN2 code — Change the PIN2 code. The PIN2 code must be 4 to 8 numbers long. The PIN2 code is required to access some
•
functions of the device and is provided with the SIM card. After three consecutive incorrect PIN2 code entries, the PIN2 code
is blocked, and you need to use the PUK2 code to unblock it before you can use the SIM card again.
Autolock period — Set a time-out after which the device is automatically locked and can be used only if the correct lock code
•
is entered. Enter a number for the time-out in minutes, or select
locked, you can still answer incoming calls and calls may still be possible to the official emergency number programmed into
your device.
Lock code — The new code can be 4-255 characters long. Both alphabets and digits can be used, and both uppercase and
•
lowercase alphabets are possible. The device notifies you if the lock code is not properly formatted.
Lock if SIM changed — Set the device to ask for the lock code when an unknown, new SIM card is inserted into your device.
•
The device maintains a list of SIM cards that are recognized as the owner's cards.
Allow remote lock — If you set this option on, you can lock the device by sending a predefined text message from another
•
phone. When you set this option on, you need to enter the remote lock message and confirm the message. The message
must be at least 5 characters long.
Closed user group (network service) — Specify a group of people to whom you can call and who can call you.
•
Confirm SIM services (network service) — Set the device to display confirmation messages when you are using a SIM card
•
service.

Change the barring password

To change the password used for barring voice, fax, and data calls, select
barring Options Edit barrings
> >
digits long. For details, contact your service provider.

Fixed dialing

When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device.
Select Menu Contacts
> >
With the fixed dialing service, you can restrict calls from your device to only certain phone numbers. Not all SIM cards support
the fixed dialing service. Contact your service provider for more information.
Copyright © 2006 Nokia. All Rights Reserved.
Options
Options PTT log. The log shows the date, time, duration, and other details of your push to
>
PTT
Yes to log out and close the service. Press
Security Phone and
> >
On to request that the PIN code is entered each time the device is switched on. This setting cannot
passw.. Enter the current code, then the new code twice. The barring password must be four
Options SIM contacts
> >
Options Active
>
Send invitation.
>
log, select the desired log event and press the voice key.
No if you want to keep the application active on the
SIM.
None to turn off the autolock period. When the device is
Menu
Fixed dialling contacts.
25
members.
Tools Settings Call barring
> > >
Options > Open.
Cellular call
>