Removing Base Plastic - Nautilus Commercial TreadClimber TC916 Service Manual

mechanIcal ServIce

6.0 - removInG BaSe plaStIc

tools needed:
• Phillips head screw driver
• 1/8 Allen bit
to Avoid electricAl shock or dAmAge
to the unit you must power off the
unit And mAke sure All power hAs been
drAined from the unit And cApAcitors by
ensuring there Are no lighted leds on
the console.
6-1: Remove three (3) front plastic screws
(see Figure 6-1).
6-2: Remove right and left side plastic covers - four (4)
screws each side (see Figure 6-2).
6-3: Remove right and left side pan covers - two (2)
screws each side (see Figure 6-3 and Figure 6-4).
1
figure 6-1
figure 6-2
figure 6-3
figure 6-4:
pan without
covers.