Memory Function - Miele W 149 Operating Instructions Manual

If an additional option is selected for
a programme, and / or the spin
speed is altered, the machine stores
these changes in memory at the start
of a programme.
The memory function is not active when
the machine is first delivered but can
be programmed to active.
First select programming mode.
A The machine must be switched off
and the drum door closed. The
programme selector must point to
"Finish".
B Press the additional option buttons
"Short" and "Water plus" at the same
time and hold pressed in and:
C . . . switch the machine on with the
"I-ON/0-OFF" button.
D Let go of all these buttons.
The indicator light "Main wash" flashes
in the sequence display.
To activate the "Memory" programmable
function turn the programme selector to
***.
40
To activate the "Memory" function press
the START button once. The rinses light
comes on in the Sequence display.
To store this setting in memory SWITCH
the machine OFF with the
"I-ON/0-OFF" button.
To deactivate the memory function re-
peat the procedure given above from
point A as far as the *** shown above.
Press the "START" button and the
"Rinses" indicator light will go out. The
function is now deactivated. Store in
memory by pressing the
"I-ON/0-OFF" button.