Miele W 149 Operating Instructions Manual page 49

The spin speed selected was
too low.
The load was not distributed
evenly enough in the drum. To
protect the machine laundry was
only spun at a reduced speed.
These noises occur at the be-
ginning or end of a pump se-
quence as a normal part of op-
eration. They are not a fault.
Imbalance has prevented auto-
matic drum positioning.
Level the machine. See installa-
tion.
Select a higher spin speed next
time.
Always mix large and small
items in the load.
–
Turn the drum manually to the
correct position (until the
autopositioning mechanism
engages).
–
Always mix large and small
items in the load. This im-
proves cleaning efficiency
and ensures better distribu-
tion of laundry in the spin cy-
cle.
49