Using Bluetooth Hands-Free With Passcode; Canceling The Passcode; Confirmation Prompts - Mazda CX-9 Owner's Manual

CX-9_8BH2-EA-10H_Edition3 Page412
Wednesday, March 23 2011 9:32 AM
Interior Comfort
Bluetooth Hands-Free (Voice Recognition)
9. Prompt: Passcode XXXX (Passcode,
PCode). Is this correct?
10. Say: [Beep] Yes
11. Prompt: Passcode is enabled.
Using Bluetooth Hands-Free with a
passcode
1. Press the pick-up button (with/without
navigation system) or talk button with
a short press (without navigation
system) or a long press (with
navigation system).
NOTE
For vehicles with the navigation system, you
can also press the talk button with a short
press and say: [Beep] "Telephone" or
"Phone".
2. Prompt: Hands-Free system is
locked. State the passcode to
continue.
3. Say: [Beep] XXXX (Say the set
passcode PCode .)
4. If the correct passcode is input, voice
guidance XXXXXX... (Ex. Mary's
device) (Device tag) is connected is
announced.
If the passcode is incorrect, voice
guidance XXXX (4-digit passcode,
Pcode) incorrect passcode, please try
again is announced.

Canceling the passcode

NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
6-158
Form No.8BH2-EA-10H
Black plate (412,1)
1. Press the pick-up button (with/without
navigation system) or talk button with
a short press (without navigation
system) or a long press (with
navigation system).
NOTE
For vehicles with the navigation system, you
can also press the talk button with a short
press and say: [Beep] "Telephone" or
"Phone".
2. Say: [Beep] Setup
3. (Type A)
Prompt: Select one of the following:
Pairing options, confirmation prompts,
select phone, language or passcode.
(Type B/Navigation system)
Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
4. Say: [Beep] Passcode
5. Prompt: Passcode is enabled. Would
you like to disable it?
6. Say: [Beep] Yes
7. Prompt: Passcode is disabled.

Confirmation Prompts

The confirmation prompt confirms the
command content to the user before
advancing to the operation requested by
the user. When this function is turned on,
the system reads out the voice input
command previously received and
confirms whether the command is correct
before advancing to the command
execution.
When the confirmation prompt function is
turned on:
(Ex. Calling John's device. Is this
correct? )