Mazda CX-9 Owner's Manual page 301

CX-9_8BH2-EA-10H_Edition3 Page301
Wednesday, March 23 2011 9:31 AM
NOTE
If you continue to press and hold the seek
tuning button ( ,
continue changing without stopping.
Scan tuning
Press the scan button (
automatically sample stations with the
strongest frequencies. Scanning stops at
each station for about five seconds. To
hold a station, press the scan button
( ) again during this interval.
Preset channel tuning
The six preset channels can be used to
store six AM and twelve FM stations.
1. To set a channel, first select AM, FM1,
or FM2. Tune to the desired station.
2. Press and hold selection button 2, 3, 4,
6, 7, or 8. The station frequency will be
displayed. The station is now held in
the memory.
3. Repeat this operation for the other
stations and bands you want to store.
To tune into one stored in the memory,
select AM, FM1, or FM2 and then
press its selection button. The station
frequency will be displayed.
NOTE
If the power supply is interrupted (fuse blows
or the battery is disconnected), the preset
channels will be erased.
Auto memory tuning
This is especially useful when driving in
an area where the local stations are
unknown. Additional AM/FM stations
can be stored without disturbing the
previously set channels.
Form No.8BH2-EA-10H
), the frequency will
) to
Black plate (301,1)
Audio System
Press and hold the auto memory button
( ). The system will automatically
scan and temporarily store up to six
stations with the strongest frequencies in
each selected band in that area.
After scanning is completed, the radio
tunes into the station with the strongest
frequency, and its frequency is displayed.
Press the auto memory button (
recall stations from the auto-stored
stations. One stored station will be
selected each time, and its frequency will
be displayed.
NOTE
If any of the following operations is
l
performed, auto-memory mode is cleared
and the normal display appears.
Band selector button (
l
pressed
Manual tuning dial is turned
l
Seek tuning button (
l
Return button (
l
If the radio is unable to tune into any
l
station after the scanning operation is
completed, "No Channel" will be
displayed.
Mute
Press the mute button (
mute the audio. Press it again to resume
audio output.
Radio Data System (RDS)
Radio text information display
A maximum of 64 characters of radio text
information sent from a broadcasting
station is displayed in the audio display.
Press selection button 5.
Interior Comfort
) to
) is
, ) is pressed
) is pressed
) once to
6-47