DHCP Server
Dynamic Host Configuration Protocol assigns
Control:
dynamic IP addresses to devices on the network.
This protocol simplifies network management
and allows new wireless devices to receive IP
addresses automatically without the need to
manually assign new IP addresses.
Select Enable to allow the DWL-7100AP to
function as a DHCP server.
IP Assigned From:
Input the first IP address available for assignment
in your network.
The Range of Pool
Enter the number of IP addresses available for
(1-255):
assignment.
SubMask:
All devices in the network must have the same
subnet mask to communicate. Enter the submask
for the network here.
Gateway:
Enter the IP address of the gateway on the
network.
Wins:
Enter the number of IP addresses available for
assignment.
DNS:
All devices in the network must have the same
subnet mask to communicate. Enter the submask
for the network here.
D-Link DWL-7100AP User Manual
DHCP Server
Dynamic Pool Settings
7