General - D-Link DWL-7100AP - Air Xpert - Wireless Access Point Product Manual

General

Device Name(*): When selecting multiple devices for configuration,
some options are unavailable for configuration by
default as noted(*) below:
This allows you to change the device name for
the selected access point. You must place a
checkmark in the Device Name box to change the
name. This option should only be configured when
one access point is selected for configuration.
IP address and
If you've selected one device for configuration
Subnet Mask(*):
and you want to change the IP address of the
device, check the IP Address box. You can then
enter an IP address and Subnet Mask for the
selected access point. This option should only be
configurable when one access point is selected
for configuration. To configure multiple devices
with an IP address at one time, please reference
the previous page.
Gateway:
Enter the IP address of your gateway, typically
your router address.
DHCP Client:
There is a drop-down menu to select enabled or
disabled. When enabled, the selected device(s)
will function as a DHCP client(s). This allows them
to receive IP configuration information from a
DHCP server. When disabled, the access point(s)
must have a static IP address assigned to them.
D-Link DWL-7100AP User Manual