Wds With Ap - D-Link DWL-7100AP - Air Xpert - Wireless Access Point Product Manual

In WDS with AP mode, the DWL-7100AP wirelessly connects multiple networks, while still functioning as a wireless AP. WDS (Wireless
Distribution System) allows access points to communicate with one another wirelessly in a standardized way. It can also simplify the
network infrastructure by reducing the amount of cabling required. Basically the access points will act as a client and an access point at
the same time.
Wireless Band:
Select IEEE802.11a or IEEE802.11g.
Mode:
WDS with AP is selected from the drop-down
menu.
SSID:
Service Set Identifier (SSID) is the name
designated for a specific wireless local area
network (WLAN). The SSID's factory default
setting is dlink. The SSID can be easily changed
to connect to an existing wireless network or to
establish a new wireless network.
SSID Broadcast: Enable or Disable SSID broadcast. Enabling this
feature broadcasts the SSID across the network.
Channel: 6 is the default channel for IEEE 802.11g. All
devices on the network must share the same
channel.
Note: The wireless adapters will automatically scan
and match the wireless setting.
Auto Channel Scan: This option is unavailable in WDS with AP
mode.
Remote AP MAC
Enter the MAC addresses of the APs in your
Address: network that will serve as bridges to wirelessly
connect multiple networks.
D-Link DWL-7100AP User Manual

WDS with AP

1