Security - D-Link DWL-7100AP - Air Xpert - Wireless Access Point Product Manual

The Security tab contains the WEP configuration settings on the intial page. If you select WPA as the authentication type, an additional
tab will appear with the WPA configuration options based on your selection.
Authentication
Select from the drop-down menu the type
Type:
of authentication to be used on the selected
device(s).
Open:
The key is communicated across the network.
Shared:
Limited to communication with devices that share
the same WEP settings.
Open System/
The key is communicated and identical WEP
Shared Key:
settings are required.
WPA:
Used to authenticate clients via a RADIUS
server.
WPA-PSK: Does not utilize a RADIUS server for authentication
but uses a passphrase that is configured on the
clients and access points.
Encryption: Enable or disable encryption on the selected
device(s).
Key Values: Select which defined key is active on the selected
device(s).
Select the key size (64-bit, 128-bit, or 152-bit) and
key type (HEX or ASCII) and then enter a string
to use as the key. The key length is automatically
adjusted based on the settings you choose.
D-Link DWL-7100AP User Manual

Security