To Disconnect Usb Cable Safely - Panasonic HDCSDT750 - HD 3D CAMCORDER Workshop Manual

≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
≥ When the unit is connected to a PC, it cannot be turned off.
Disconnect the USB cable, before turning this unit off.
≥ Do not disconnect the USB cable or the AC adaptor while the access lamp is on or card
access icon (
≥ When performing reading/writing between a PC and an SD card, be aware that some SD
card slots built into PCs and some SD card readers are not compatible with the SDHC
Memory Card or SDXC Memory Card.
≥ When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html

∫ To disconnect USB cable safely

1 Double click the
≥ Depending on your PC's settings, this icon may not be displayed.
2 Select [USB Mass Storage Device] and click [Stop].
3 Verify [MATSHITA HDC-SDT750/SD USB Device] is selected and click [OK].
134
VQT3B18
) appears on the unit screen.
icon in task tray displayed on the PC.