Panasonic HDCSDT750 - HD 3D CAMCORDER Workshop Manual page 106

∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the
images correctly. (Check the TV setting.)
: [SETUP] # [TV ASPECT] #
[4:3]
Example of images with a 16:9 aspect
ratio on a regular TV (4:3)
[TV ASPECT] setting
[16:9]
≥ If a wide-screen TV is connected, adjust
the aspect setting on the TV. (Refer to the
operating instructions of the TV for
details.)
Refer to the following support site for information about Panasonic TVs with an SD
card slot for playing back your pictures.
http://panasonic.net/
≥ It may not be possible to play back scenes on the TV depending on the recording mode.
≥ For details on how to play back, please read the operating instructions for the TV.
106
VQT3B18
∫ To display the on-screen
When the EXT DISPLAY button on the
remote control is pressed, the information
displayed on the screen (operation icon and
time code etc.) can be displayed/not
displayed on the TV.
≥ It will not display when the unit is turned off.
[4:3]
≥ When the AV multi cable is connected to
this unit, the setup screen of the AV multi
destination is displayed on the screen of
this unit. Touch either [COMPONENT] or
[AV OUT] in accordance with the terminal
connecting to the TV. (l 107)
≥ If the HDMI mini cable and AV multi cable
are connected at the same time, output
will be prioritized in order of the HDMI mini
cable, AV multi cable.
information on the TV
/VOL
EXT DISPLAY
SEARCH PLAY
STILL ADV PAUSE
SKIP STOP
STOP
DATE/TIME
SEARCH
STILL ADV
SKIP