Interface Box Setup; Installing An Ssd (Solid State Drive); Attaching The Silicone Jacket - Panasonic AG-MSU10 Operating Instructions Manual

Installing an SSD in the AG-MBX10G Interface Box allows the user to copy data recorded on a P2 card cam-
era-recorder to the SSD.
USB bus power operation makes use of the AC adapter unnecessary. In addition to a USB 2.0 connection,
the unit also provides a high-speed eSATA connection.
Installing an SSD (Solid
State Drive)
1
Remove the five screws in the interface
box and remove the top lid.
Back side Back side
Use a No. 0 Phillips screwdriver to remove the screws.
2
Slide the SSD into the box while taking
care to align the connectors on the SSD
with those in the box.
 NOTE:
• Do not insert the SSD at an angle as the connec-
tors could be damaged.
Connectors
3
Secure the SSD using the four supplied
3.0 mm screws.
Back side Back side
Use a No. 2 Phillips screwdriver to secure the screws.

Interface Box

Interface Box Setup

SSD
4
Close the top lid and secure the lid using
the five 2 mm screws removed in step 1.
Back side Back side
Use a No. 0 Phillips screwdriver to secure the screws.
 NOTE:
• Be sure to use a Phillips No. 0 screwdriver for the lid
screws and a Phillips No. 2 screwdriver for the SSD
securing screws.

Attaching the Silicone Jacket

When using the interface box as a stand-alone ex-
ternal device, slip it into the supplied silicone jacket
to protect its connectors.