Selecting Storage Device - Panasonic AG-MSU10 Operating Instructions Manual

 Partition type
Partition type
Type S A special disk format for
high-speed writing/loading
data by P2 card.
FAT A hard disk whose primary
partition is formatted either
using FAT16 or FAT32. The
root partition or the "CON-
TENTS" folder under any
*
1
folder
P2STORE A P2 Store (AJ-PCS060G)
hard disk. Cannot be used
for writing data.
OTHER A storage device formatted
using a format other than
those above.
• NTFS, HFS+, ext3 or other
file system other than
FAT16 or FAT32.
*
1
: This enables up to 100 folders in up to three levels. Folders appear in order from the top level. Long file
names and two-byte character filenames are not supported.
Example:
/CONTENTS
/SAMPLE/CONTENTS
/SAMPLE/20100101/CONTENTS
/SAMPLE/20100101/1200/CONTENTS

Selecting Storage Device

Before copying, select the storage device you want
to copy clips to. The Explore screen and thumbnail
screen that appear are those of the storage device
selected above.
1
Connect a storage device for copying.
2
Turn the unit on.
Features
Thumbnail
display
is used.
Available functions
Copying
cards
P2 card
(P2 card
 Storage
 Storage
device)
 
 
×

× ×
Can be displayed
Can be displayed
Can be displayed
Cannot be displayed  This is the fourth level
and will therefore not appear.
3
Press the CHANGE TARGET (F1) button
to change destination.
• Each press of the button will change the
destination drive in the following order.
INTERNAL INTERNAL
(interface box) (interface box)
 NOTE:
• It may take some time (a few seconds) for the unit to
recognize the connected storage device and display the
related information.
Copying clips
Storage
device
device  P2 card
 
 
×

× ×
USB USB eSATA eSATA
Format


×
