Status; Setting - Panasonic AG-MSU10 Operating Instructions Manual

STATUS

Menu
COPY LOG
HOUR METER
SYSTEM INFO

SETTING

Menu
VERIFY
BUZZER
LCD BACKLIGHT
LCD TIMEOUT
AUTO POWER OFF
DATE FORMAT
CLOCK SET
MENU RESET
0
Shows the history (log data) of copying results.
Indicates the following time data.
OPERATION: Indicates the number of hours that the unit has been on.
LCD ON: Indicates backlight on time for the LCD monitor in hours.
POWER ON: Indicates the number of times the power has been
turned on.
Shows the version of software installed in this unit.
Use the settings below to determine whether or not the system should
automatically compare the original P2 card data with data copied to
the storage device when using TYPE S formatting for copying.
ON: Compares data after copying. The Verify process takes as long as
copying.
OFF: No comparison is made.
Use the settings below to determine how the buzzer will notify you
when copying ends, when the device is powered up and of any errors
that might occur.
ONCE: Sounds the buzzer once
REPEAT: Continues sounding until an action is performed
OFF: Buzzer is disabled
Allows you to adjust LCD monitor backlight brightness.
LIGHT: Normal
DARK: Dark
Make the settings below to have the LCD monitor automatically turn off
after a specified time (approx. 5 min) of inactivity.
ON: The LCD switches off automatically
OFF: The LCD does switch off
Make the settings below to set the time until auto power off is acti-
vated.
Off/5 min/10 min/15 min/20 min/25 min/30 min
The default setting is 10 min.
You can change the order that Year, Month and Day are displayed.
Y-M-D: Year, month and day order
M-D-Y: Month, day, and year order
D-M-Y: Day, month and year order
Sets the calendar and time.
Initializes menu settings and clears copy result logs.
YES: Returns menu settings to their defaults and clears copy result
history.
NO: Cancels initialization
Setting
Setting