Becker DTM High Speed 7910 Operating Manual page 4

Switching the speed limits display on/off
If the speed limits display is ON, the system will inform you
of the maximum permissible speed limit for the route along
which you are travelling during route guidance, insofar as this
information is available.
G
Warning
Accident hazard
Road traffic regulations always take priority when a vehicle
is being driven in traffic. Road signs en-route should always
be heeded. In some cases, the speed limit indicated by the
navigation system may be incorrect. At all times, the driver
must decide whether or not to heed the speed limit indicated.
We do not accept liability for erroneous data provided by the
navigation system.
     
Set and confirm
By pressing the right rotary control
between speed limits display
Setting is confirmed and accepted by pressing and holding
the right rotary control .
Subject to errors and technical modifications
in the System Settings menu.
selection can be made
or .
If, when the speed limit display is ON, you travel along a
route with a speed limit and this speed limit is stored on the
navigation CD, the corresponding symbol will appear on the
right-hand side of the display indicating the speed limit.
T
The distance to the next point at which for example a turn
should be made is displayed below the navigation arrow,
which appears in reduced format.
On routes with variable speed limits (dependent on weather
conditions, time of day etc.) a symbol with the text
speed with an underscore (e.g.: "80") draws the driver's atten-
tion to the fact that the speed limit is variable.
As temporary speed limits (e.g. due to road works)
Note:
are usually short-lived, these have not been included
on the CD.
9
Navigation CD 2.X
T V
Copyright by Becker GmbH, D-76303 Karlsbad
or a