Honda 2011 CR-V Owner's Manual page 94

Door Locks
3. Push and hold the front of the
master door lock switch on the
driver's door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
Release the switch, and within 20
4.
seconds, turn the ignition switch
to the LOCK (0) position.
88
To program the Drive Lock mode:
Locks all doors and the tailgate when
the vehicle's speed reaches about 10
mph (15 km/h).
Make sure the shift lever is in the
1.
Park (P) position.
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
3. Push and hold the brake pedal,
and move the shift lever out of the
Park (P) position.
Push and hold the front of the
4.
master door lock switch on the
driver's door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
5. Release the switch, and within 20
seconds, turn the ignition switch
to the ACCESSORY (I) position.
Move the shift lever to the Park
(P) position.
6. Turn the ignition switch to the
LOCK (0) position.