Honda 2011 CR-V Owner's Manual page 96

Door Locks
To program the Park Unlock mode:
Unlocks the driver's door or all doors
and tailgate when the shift lever is
moved into the Park (P) position with
the brake pedal depressed.
1. Make sure the shift lever is in the
Park (P) position.
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
90
3. Push and hold the rear of the
master door lock switch on the
driver's door. You will hear a click.
Continue to hold down the switch:
Until you hear another click
(after about 5 seconds) to
activate
driver's door unlock
feature.
Or, until you hear two more
clicks (after about 10 seconds)
to activate
all doors and tailgate
.
unlock feature
4. Release the switch, and within 20
seconds, turn the ignition switch
to the LOCK (0) position.
To program the Ignition Switch
Unlock mode:
Unlocks the driver's door or all doors
and tailgate when the ignition switch is
moved out of the ON (II) position.
1. Make sure the shift lever is in the
Park (P) position.
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.