Honda 2011 CR-V Owner's Manual page 184

Playing an iPod (Canadian EX model and EX-L model without navigation system)
To Play an iPod
This audio system can play the audio
files on the iPod with the same
controls used for the in-dash disc
changer. To play an iPod, connect it
to the USB adapter cable in the
upper glove box by using your dock
connector, then press the CD/AUX
or AUX button. The ignition switch
must be in the ACCESSORY (I) or
ON (II) position. The iPod will also
be recharged with the ignition switch
in these positions.
The audio system reads and plays
playable sound files on the iPod. The
system cannot operate an iPod as a
mass storage device. The system will
only play songs stored on the iPod
with iTunes.
iPod and iTunes are registered
trademarks owned by Apple Inc.
178
iPods compatible with your audio
system using the USB adapter cable
are:
Model
iPod classic Ver. 1.1.2 or more
(80/160 G)
iPod classic Ver. 2.0.1 or more
(120 G)
iPod with video
(iPod 5th Ver. 1.3.0 or more
generation)
iPod nano Ver. 1.3.1 or more
iPod nano Ver. 1.1.3 or more
2nd generation
iPod nano Ver. 1.1.3 or more
3rd generation
iPod nano Ver. 1.0.3 or more
4th generation
iPod nano Ver. 1.0.1 or more
5th generation
iPod touch Ver. 1.1.5 or more
iPod touch Ver. 2.2.1 or more
2nd generation
Use only compatible iPods with the
latest software. iPods that are not
compatible will not work in this audio
unit.
Software
NOTE:
Do not connect your iPod using a
hub.
Do not keep the iPod in the
vehicle. Direct sunlight and high
heat will damage it.
Do not use an extension cable
between the USB adapter cable
equipped with your vehicle and
your dock connector.
We recommend backing up your
data before playing it.
Some devices cannot be powered
or charged via the USB adapter. If
this is the case, use the accessory
adapter to supply power to your
device.