With A Tether - Honda 2011 CR-V Owner's Manual

Installing a Child Seat with a
Tether
A child seat with a tether can be
installed in any seating position in
the back seat.
Each rear outside seating position
has an anchorage point on the seat-
back, and the center seating position
has an anchorage point in the ceiling
near the tailgate.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
Using an Outer Anchor
1. On vehicles with the dual deck
cargo shelf, remove it (see page
117 ).
2. After properly securing the child
seat with the lap/shoulder belt
(see page 47 ), route the tether
strap over the top of the seat-back
and through the legs of the head
restraint.
Installing a Child Seat
ANCHOR
3. Attach the tether strap hook to the
anchor, making sure the tether
strap is not twisted.
4. Tighten the strap according to the
seat maker's instructions.
5. Reinstall the dual deck cargo shelf.
ANCHOR
TETHER STRAP HOOK
CONTINUED
49