With Latch - Honda 2011 CR-V Owner's Manual

Installing a Child Seat
Installing a Child Seat with
LATCH
Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for CHildren) at the rear
seats to secure a child seat in any
seating position: one in each outer
seating position, or one in the center.
The five lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.
The location of each lower anchor is
indicated by a small button above the
anchor point.
44
LOWER ANCHORS FOR
BUTTON
CENTER LATCH
LOWER ANCHORS FOR OUTER LATCH
When you install a child seat in the
rear center seating position, use the
center lower anchors as shown in the
illustration. To install a child seat in
either outer seating position, use the
outer lower anchors. You can install
up to two child seats at a time using
the outer lower anchors.
Do not attach two child seat
connectors to a single lower anchor
at a time.
Using the Outer LATCH
OUTER LOWER ANCHORS
To install a LATCH-compatible child
seat in either of the rear outer seats:
1. Store the seat belt buckle or
tongue in the storage pockets.
2. Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.