Honda 2011 CR-V Owner's Manual page 393

SPACER CONE
TAB
To remove the spacer cone, squeeze
the tabs on the wing bolt to
disengage it from the center of the
spacer cone, then pull the bolt
downward.
To install the wing bolt to the spacer
cone, reverse this procedure.
18. Secure the flat tire by screwing
the wing bolt back into its hole.
19. Store the jack in its holder. Turn
the jack's end bracket to lock it in
place. Store the tools, and place
the cover on the flat tire of the
cargo area.
Loose items can fly around the
interior in a crash and could
seriously injure the occupants.
Store the wheel, jack, and tools
securely before driving.
20. Store the center cap in the spare
tire well. Make sure it does not get
scratched or damaged.
21. Close the tailgate.
Changing a Flat Tire
22. Your vehicle's original tire has a
tire pressure monitoring system
sensor. To replace a tire, refer to
Changing a Tire with TPMS
page 328 ).
(see
387