Cleaning The Seat Belts - Honda 2011 CR-V Owner's Manual

5. Press the brake pedal to make
sure the new bulb is working.
Put the socket back into the light
6.
assembly, and turn it clockwise to
lock it in place.
Put the cover back on the light
7.
assembly. Push it in until it locks
in place.
Replacing a Rear License Plate
Light Bulb
This light should be replaced by your
dealer.

Cleaning the Seat Belts

LOOP
If your seat belts get dirty, use a soft
brush with a mixture of mild soap
and warm water to clean them. Do
not use bleach, dye, or cleaning
solvents. Let the belts air-dry before
you use the vehicle.
Lights, Cleaning the Seat Belts
Dirt build-up in the loops of the seat
belt anchors can cause the belts to
retract slowly. Wipe the insides of
the loops with a clean cloth
dampened in mild soap and warm
water or isopropyl alcohol.
365