Honda 2011 CR-V Owner's Manual page 242

Playing an iPod (EX-L model with navigation system)
To Play an iPod
This audio system can select and
play the audio files on the iPod with
the same controls used for the in-
dash disc player. To play an iPod,
connect it to the USB adapter cable
in the upper glove box by using your
dock connector. Press the AUDIO
button beside the screen to show the
audio display and touch the USB icon.
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
The iPod will also be recharged with
the ignition switch in these positions.
The audio system reads and plays
playable sound files on the iPod. The
system cannot operate an iPod as a
mass storage device. The system will
only play songs stored on the iPod
with iTunes.
iPod and iTunes are registered
trademarks owned by Apple Inc.
236
iPods compatible with your audio
system using the USB adapter cable
are:
Model
iPod classic Ver. 1.1.2 or more
(80/160 G)
iPod classic Ver. 2.0.1 or more
(120 G)
iPod with video
(iPod 5th Ver. 1.3.0 or more
generation)
iPod nano Ver. 1.3.1 or more
iPod nano Ver. 1.1.3 or more
2nd generation
iPod nano Ver. 1.1.3 or more
3rd generation
iPod nano Ver. 1.0.3 or more
4th generation
iPod nano Ver. 1.0.1 or more
5th generation
iPod touch Ver. 1.1.5 or more
iPod touch Ver. 2.2.1 or more
2nd generation
Use only compatible iPods with the
latest software. iPods that are not
compatible will not work in this audio
unit.
Software
NOTE:
Do not connect your iPod using a
hub.
Do not keep the iPod in the
vehicle. Direct sunlight and high
heat will damage it.
Do not use an extension cable
between the USB adapter cable
equipped with your vehicle and
your dock connector.
We recommend backing up your
data before playing it.
Some devices cannot be powered
or charged via the USB adapter. If
this is the case, use the accessory
adapter to supply power to your
device.