Using The Handle Buttons; Baby Lock Jewel Regulator Setup - Baby Lock Jewel BL J18 Instruction And Reference Manual

Using the Handle Buttons

The following functions take effect by pressing and then quickly
releasing the button (Diagram G and Photo 17):
Selection Type Function
Needle Up/
Needle Down
Start/Stop
Speed Up
Speed Down
Diagram G Photo 17
20
Allows the user to manually move the
needle one ½ stitch or one full stitch at a
time. Half or full stitch is set by the user
on the settings menu.
Starts and stops the machine.
By pushing the plus sign, the speed of
the machine will gradually increase.
The % of machine speed is displayed on
the Menu bar ranging from 10-100%.
(Manual mode only)
By pushing the minus sign, the speed
of the machine will gradually decrease.
The % of machine speed is displayed on
the Menu bar ranging from 10-100%.
(Manual mode only)
Baby Lock Jewel
Stitch Regulator Setup
To use regulated mode it must be selected from the
Settings Menu.
1.
Scroll until you can see Quilt Mode from the
Menu and press Select (Photo 18).
2.
Choose Regulated from the Quilt Mode Menu
and press Select.
3.
The menu prompts you to select the number of
Stitches Per Inch you desire (Photo 19). Select any
number from 4 to15 stitches per inch by pressing
the up/down arrows (the larger the number, the
smaller the stitch). Press Select to return to the
main Menu.
4.
The Display will now indicate on the first line
that the machine is in Regulated Mode and will
display the Stitches Per Inch.
5.
From the front or rear handles, press Start and
begin moving the machine. The needle will imme-
diately start stitching. As you move the machine,
your stitches will be regulated to the length set in
step 3. If you press Start and don't move the ma-
chine, the needle will start stitching, but will stop
after 3-4 stitches.
Photo 18 Photo 19