Using The Displays On The Handles - Baby Lock Jewel BL J18 Instruction And Reference Manual

Using the Displays
on the Handles
Display Menus
The Baby Lock Jewel has a settings menu
display on the front (Photo 16) and rear
mount handles as well. Settings may be
changed at either of these locations.
Use the Up or Down
press "Select" to access a submenu or to
change a selection:
Selection Type Function
Quilt Mode
Needle Up/Down
Stitch Half/Full
18
arrows and then
Manual Mode: Allows the user to manually operate the machine at a selected needle speed by
setting the preferred speed percentage (for example, 15% is very slow, 80%-100% is very fast).
Regulated: (See Baby Lock Jewel Stitch Regulator Setup on page 20 for more information).
Allows the user to select a specified stitch length and the machine regulates the motor speed.
The machine will maintain an appropriate motor speed for the selected stitch length if the user
moves the machine in a consistent manner.
Note: As with any Stitch Regulator, it is possible to "outstitch" the regulator by moving the ma-
chine too quickly. The machine has a top speed of 1500 stitches per minute. If you try to move
the machine faster than 100% of its top speed, you will have irregular stitches. Radical move-
ments and stitching too slowly can also cause problems. Practice to establish a smooth rhythm
with your stitching and allow the machine to work with you.
Stitch/In: (Stitches per inch.): Allows the user to determine the stitch length desired. Can be set
from 4-15 stitches per inch.
Select: Press to accept user selection and return to the main menu.
Programs the needle to automatically return to the up or down position when stopped.
Press Select to toggle between Needle Up and Needle Down.
Programs the needle to take a half or full stitch when Needle Up/Down
button is pressed. Press Select to toggle between Stitch Half and Stitch Full.
Photo 16