Do you have a question about the Touch & Sew 603 and is the answer not in the manual?
Questions and answers
Jan wasson
March 13, 2025
How to get bobbin holder back in place after cleaning.
1 comments:
Mr. Anderson
March 13, 2025
To reinsert the bobbin holder in a Singer Touch & Sew 603 after cleaning, follow these steps:
1. Turn Off the Machine – Ensure the sewing machine is turned off for safety. 2. Open the Bobbin Area – Remove the slide plate or bobbin cover to access the bobbin holder. 3. Position the Bobbin Holder – Hold the bobbin holder with the open side facing up and align it with the race area. 4. Align the Notches – Ensure the small protrusions or notches on the bobbin holder fit into the corresponding slots in the machine. 5. Press the Holder in Place – Gently press the bobbin holder down so it sits securely in its compartment. 6. Check for Proper Fit – Rotate the handwheel slowly to ensure the bobbin holder moves freely without obstruction. 7. Reinstall the Bobbin – Insert the bobbin into the holder, ensuring the thread unwinds in the correct direction. 8. Close the Bobbin Cover – Slide the cover or plate back into place.
Test by manually turning the handwheel to confirm smooth operation before resuming sewing.
Need help?
Do you have a question about the Touch & Sew 603 and is the answer not in the manual?
Questions and answers
How to get bobbin holder back in place after cleaning.
To reinsert the bobbin holder in a Singer Touch & Sew 603 after cleaning, follow these steps:
1. Turn Off the Machine – Ensure the sewing machine is turned off for safety.
2. Open the Bobbin Area – Remove the slide plate or bobbin cover to access the bobbin holder.
3. Position the Bobbin Holder – Hold the bobbin holder with the open side facing up and align it with the race area.
4. Align the Notches – Ensure the small protrusions or notches on the bobbin holder fit into the corresponding slots in the machine.
5. Press the Holder in Place – Gently press the bobbin holder down so it sits securely in its compartment.
6. Check for Proper Fit – Rotate the handwheel slowly to ensure the bobbin holder moves freely without obstruction.
7. Reinstall the Bobbin – Insert the bobbin into the holder, ensuring the thread unwinds in the correct direction.
8. Close the Bobbin Cover – Slide the cover or plate back into place.
Test by manually turning the handwheel to confirm smooth operation before resuming sewing.
This answer is automatically generated