— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
EMBROIDERY
Embroidery step by step
The basic steps for embroidery are as follows.
1
Presser foot attachment
2
Checking the needle
Embroidery unit
3
attachment
4
Replacing the bobbin case
5
Bobbin thread setup
6
Fabric preparation
Embroidery frame
7
attachment
8
Pattern selection
9
Checking the layout
10
Embroidery thread setup
140
Attach the embroidery foot "Q".
For details on attaching the embroidery foot, refer to "Attaching the
embroidery foot" (page 141).
↓
Use a needle matched to the fabric.
For details on replacing the needle, refer to "Replacing the needle" (page
40).
↓
Attach the embroidery unit.
For details on attaching the embroidery unit, refer to "Attaching the
embroidery unit" (page 144).
↓
When using other kinds of embroidery bobbin thread, use the optional
alternate bobbin case (pink marking).
For details on replacing the bobbin case, refer to "Cleaning the race"
(page 176).
↓
For the bobbin thread, wind embroidery bobbin thread and set it in
place.
For details on setting up the bobbin thread, refer to "Winding/Installing
the Bobbin" (page 23).
↓
Attach a stabilizer material to the fabric, and hoop it in an embroidery
frame.
For details on preparing the fabric, refer to "Preparing the Fabric" (page
147).
↓
Attach the embroidery frame to the embroidery unit.
For details on attaching the embroidery frame, refer to "Attaching the
Embroidery Frame" (page 151).
↓
Select an embroidery pattern.
For details on selecting embroidery patterns, refer to "Selecting
Embroidery Patterns" (page 153).
↓
Check and adjust the size and position of the embroidery.
For details on adjusting the layout, refer to "Adjusting the layout" (page
165).
↓
Set up embroidery thread according to the pattern.
For details on setting up the thread, refer to "Upper Threading" (page
29).