Table of Contents
Advertisement
1
G
S
ETTING
TARTED
Installing the battery
Your Kyocera KX12 phone comes with a
removable lithium ion (LiIon) battery.
charge the battery before using the phone.
charge the battery see "Charging the battery" on
page 2. Only connect the charger as instructed.
To install the battery:
Place the phone face
1.
down with the battery
recess toward you.
Place the battery in
2.
the phone recess with
the copper contacts
toward the bottom of the
phone (1). Press the
upper portion of the
battery into place (2).
Place the two tabs at the
3.
top of the rear cover into
the openings at the top
of the phone assembly.
Press the rear cover onto
the phone.
Close the port plug over
4.
the latch, charging jack,
and headset jack.
User Guide for the Kyocera KX12 Phone
Removing the battery
Warning:
Fully
sure the phone is powered off.
To
Open the port plug.
1.
Between the phone
2.
jacks, there is a latch to
aid you in opening the
rear cover. Pull the top
of the latch outward to
release the rear cover.
Pull the rear cover away
3.
to remove it from the
phone.
Press the battery toward
4.
the bottom of the phone
and pull the battery out
of the recess.
Before you remove the battery, make
1
Advertisement
Table of Contents
