Setting Position Location - Kyocera KX12 User Manual

To purchase a data cable call 800-349-
Note:
4188 (U.S.A. only), 858-882-1410, or visit
www.kyocera-wireless.com/store
Connect the phone to the laptop or PC.
1.
Set the Com Port speed.
2.
→
Select
3. Menu Settings
.
Data/Fax Calls
Select an option and press
4.
– allows only voice calls.
Voice only
– or
Fax, next call Data, next call
phone to fax mode or data mode for the
next incoming call or the next 10 minutes.
– or
Fax, until off Data, until off
phone into fax or data mode until the
phone is turned off.
You cannot receive voice or PTT calls while
Note:
the phone is in data/fax mode.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired.
Enable TTY only when using the phone with
Note:
a TTY device.
Connect the TTY device to the phone.
1.
Enter
2.
your keypad.
Press to select
3. TTY
Press to select
4. OK
Highlight an option and press
5.
TTY/TDD service may not be available.
Note:
Check with your service provider for more
information.
User Guide for the Kyocera KX12 Phone
.
→ →
Network
:
sets the
forces the
from
.
to clear the message.
.

Setting position location

This setting allows you to share your location
information with network services other than
emergency services (911, 111, 999, 000, etc.) in
markets where service has been implemented.
This feature works only when your phone is
Note:
in digital mode. You do not have the option of
turning off the locator to emergency services.
→
Select
1. Menu Settings
.
Location
Select or
2. 911 Only Location On
– (default) shares your position
911 Only
information only with emergency services
when you call your 3-digit emergency
code (911, 000, 111, etc.).
– shares your position
Location On
information with your service provider's
network in addition to
emergency services.
→ →
Network
.
45