Kyocera KX12 User Manual page 30

Setting Call Guard
You can set the phone to warn you before you
answer or place a call while roaming.
→
• Select
Menu Settings
→
Call Guard Call Prompt
– The phone now emits a distinctive roam
ring to indicate when you are roaming
during calls.
– To accept or place a call while roaming,
you must press
Call Prompt is disabled when the phone is
Note:
in emergency mode.
Setting digital or analog mode
Depending on services available from your service
provider, you may set the phone to either digital
or analog mode. This is useful if you are in an
area that borders on digital service and the
automatic feature is causing the phone to keep
switching between modes.
→
Select
1. Menu Settings
.
Digital/Analog
Select an option and press
2.
– automatically switches the
Automatic
phone between digital and analog.
– sets the phone to work in
Analog only
analog mode only.
– forces a call into analog mode
Analog call
for the duration of the next call.
22
→ →
Convenience
.
.
→ →
Network
.
– sets the phone to work in
Digital only
digital mode only.
Turning roaming on or off
This setting allows you to control the phone's
roaming feature by specifying which signals the
phone will accept.
→
Select
1. Menu Settings
.
Roam Option
Select an option and press
2.
– (recommended setting)
Automatic
accepts any system the phone
service provides.
– prevents you from making
No roaming
or receiving calls outside of your home
service area.
If your phone has more than one setting for
Note:
Automatic, contact your service provider to
determine which one to use.
Making and Answering Calls
→ →
Network
.