Table of Contents
Advertisement
–
limits all incoming and
Limit All
outgoing calls.
Erasing all contacts
You can erase all entries in your Contacts
directory.
→
Select
1.
Menu
Settings
Enter your four-digit lock code.
2.
Select
3.
Erase Contacts
Select
to erase all contacts. A message
4.
Yes
appears: "Erase ALL Contacts?"
Select
again to erase all contacts.
5.
Yes
Network settings
Switching between phone lines
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number. You must first
establish a second phone line with your service
provider. Once established, a second phone
number becomes available in the menu
for selection.
Not available on all phones, check with
Note:
your service provider.
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were "off" for that number. Your voicemail,
however, will still take messages. All contacts and
settings are shared for both lines.
44
→
.
Security
.
→
Select
1.
Menu
Settings
.
Set Phone Line
Select one of the two lines and press
2.
Data Settings
Setting Com port speed
The Com Speed sets the data rate at which your
phone connects to a laptop or personal computer
or at which it sends and receives over-the-air
text messages.
Not available on all phones, check with
Note:
your service provider.
→
Select
1.
Menu
Settings
.
Com Port Speed
Select the speed:
2.
19.2 kbps
(default),
230.4 kbps,
There may be a higher charge for making
Note:
calls using high-speed data in areas where 1X
service is available. Check with your service
provider for details.
Setting the phone to receive data
or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice or PTT
calls while the phone is in data/fax mode. To
receive data or faxes, you must connect the phone
to a laptop or PC and switch the phone from voice
mode to data/fax mode.
Customizing Your Phone
→
→
Network
.
→
→
Accessories
,
115.2 kbps
or
.
Other
Advertisement
Table of Contents
